DRAFT FOR LAWYER REVIEW. NOT IN FORCE. NOT LEGAL ADVICE.

Engineering Estimate Disclaimer

1. FabForge gives engineering estimates, not a stamped design or a professional engineering opinion.
2. Every number marked EST must be checked by a qualified person before you cut, weld, lift, wire, pour or pressurize.
3. Standards are cited by number (for example AWS D1.1, ASME B31.3, NFPA 70). Read the current edition you are required to follow.
4. Machine programs leave FabForge as Draft. A person must prove them out on the machine.
5. Where law or your customer requires a licensed Professional Engineer, get one.

FabForge by Fabrotic (MECHRITE LLC dba Fabrotic). Draft dated October 2026.